• Strut tubes are made of an advanced Kevlar® composite making them lightweight, but 4x stronger than steel

• Composite tubes are resistant to environmental and chemically corrosive materials (battery acid, salts, water, fuels, etc.) and offer exceptional impact resistance. Tubes are electrically non-conductive.

• 18,000 lb max working load with 2:1 safety factor

• Fully collapsing struts are ultra compact for storage

• No couplings, twist locks or guess work – just slide out as much strut as you need and pin it. Simple design is easy to use reduces training time.

• Removable Strut Jack turns any strut into an 8,000 lb ram

• Universal Combi-head with piercing point, 3/8" chain slot, 2x4 / 2x6 center support with nail holes reduces response time, no fumbling around looking for the right accessory head

• Large, yellow, glove friendly pins – easy to use and find when dropped

• Safety interlock system prevents overextension of strut tubes

• Removable Base Plate articulates 180˚, accepts ratchet strap hooks or pickets

• Comprehensive kits include accessories to accommodate advanced stabilization needs

• Proudly manufactured in the USA

We have a TeleCrib® strut kit to fit any department's needs and budget.

• TeleCrib Engine Kit:(CTC-6001) A small, compact kit designed for Engines or Pumpers with limited compartment space, but who may carry a combo extrication tool for light extrication. Includes one short and one long strut plus accessories.

• TeleCrib Truck Kit:(CTC-6002) Our most popular kit contains two short and two long struts, plus all the accessories needed to stabilize one to two cars in most extrication scenarios.

• TeleCrib Rescue Kit:(CTC-6003) Our largest stabilization kit with four short and four large struts is intended for dedicated rescue squads, for multi-car and advanced extrication scenes.

• TeleCrib Truck/Tripod Kit:(CTC-6004) This kit comes with one short and three long struts to make a 2 person, OSHA compliant tripod. Includes all of the accessories for both extrication stabilization and a confined space rescue platform without taking up any additional compartment space.

• TeleCrib Rescue/Tripod Kit:(CTC-6005) This large kit contains 4 short and 4 long struts with stabilization and tripod accessories. Use this kit for both advanced stabilization and as an OSHA compliant, 2 person rated tripod without taking up any additional compartment space.

For a complete product list CLICK HERE

For pricing information please contact your local distributor or e-mail Rescue42@rescue42.com

• TeleCrib® Strut Jack (CTC-503): A removable 8,000 lb jack which fits over the strut body and gives the rescuer a controlled means for lifting or lowering a load. The Jack has a 15" range, but can be used to raise or lower the entire extension of both strut sizes by pinning the strut and resetting the jack. Because it is removable, it can be moved from strut to strut as needed, minimizing storage requirements, cost and kit weight.

• Picket (CTC-520): 1" diameter x 3.5' long x 2 ¾" head – Good to use when other anchor systems are not available. Can be driven through picket holes in the TeleCrib® baseplate to secure struts to the ground

• Chain (CTC-521): 3/8" x 20', grade 70 with grab hooks at both ends, 6,600 lb working load. TeleCrib® combi-heads are designed with a 3/8" chain slot to use with chain saddling techniques.

• Strut Mount Brackets (CTC-524): Perfect for securing struts to any compartment surface or pullout tray. 2 per set.

Extra components (All or most of the following components come standard with kits)

• Ratchet Strap
• Hook Cluster
• Cinch Ring
• Screw Jack Head
• A-Frame Head
• Spike Foot
• Large Accessory Bag
• Spare Pins (yellow strut pins/steel base pins)

For A Complete List of Our Stabilization Accessories CLICK HERE

LENGTH	1 PIN	2 PINS
3'	10,000	18,000
4'	10,000	15,000
5'	10,000	11,000
6'	8,000	8,000
7'	5,000	5,000
8'	4,000	4,000

Download complete TeleCrib® technical specifications (pdf)

Click here to see table in metric

Order a FREE instructional stabilization DVD

Watch instructional video online

View Struts In Action (hundreds of scene and training photos from customers)

Download instructional PowerPoints

Download Owner's Manuals

Download sales sheets

Upcoming events and trainings

FAQ

• Upgrade your Truck Kit to a Truck/Tripod Kit (CTC-522): Turn your existing Truck Kit into a Truck/Tripod Kit (includes 1 tripod head w/ base safety chain, 1 long strut w/ head, base and pins, 2 spike feet and 1 small accessory bag)

• Upgrade your Rescue Kit to a Rescue/Tripod Kit (CTC-523): Turn your existing Rescue Kit into a Rescue/Tripod Kit (includes 1 tripod head w/ base safety chain, and 1 spike foot)

• Save up to $2000 by trading in your old steel struts! – click for details